Installation With An Existing Router - Motorola VT2142 User Manual

A

Installation With an Existing Router

To AC
power
Computer to configure
the VT2142
Unplug your cable or DSL modem power cord or adapter.
1
Unplug your router power cord or adapter. Please leave your modem and router connected to the cable or
2
phone line that provides your Internet connection.
Disconnect one computer from your router.
3
Connect one end of the blue Ethernet cable to an Ethernet port on your router.
4
Connect the other end of the blue Ethernet cable to the blue Ethernet port labelled Internet on the rear panel
5
of your voice gateway.
Connect one end of the yellow Ethernet cable to the Ethernet port on your voice gateway.
6
Connect the other end of the yellow Ethernet cable to the Ethernet port on the computer you disconnected in
7
step 3.
VT2142 Voice Gateway User Guide
Overview Installation
Configuration:
-
+
Reset
Power
LAN 4
Troubleshooting Contact
Basic Advanced
3 2 1 WAN
You must connect a
phone to the
Phone 1 port
FAQ Glossary
TCP/IP
Internet
Cable or DSL modem
Existing router
Optional phone or fax machine
for a second line from Vonage
License
6