More Ip Subnets - Motorola Netopia Administrator's Handbook

Administrator's Handbook

More IP Subnets

More IP Subnets
When you click the
One subnet is preconfigured by default. The Additional IP Subnets screen allows you to configure up to seven
secondary subnets and their DHCP ranges, by entering IP address/subnet mask pairs:
☛
Note:
You need not use this screen if you have only a single Ethernet IP subnet.
◆
To add an IP subnet, enter the Gateway's IP address on the subnet in the IP Address field and the subnet
mask for the subnet in the Netmask field.
◆
Enter the DHCP Start Address and End Address of the subnet range in their respective fields.
Ranges cannot overlap and there may be only one range per subnet.
If DHCP Server (see
Address fields do not appear.
◆
Add this IP Subnet
Click the
To Edit or Remove a configured subnet, click the respective icon in the list item. When you are finished, click the
Apply Changes
button.
24
link, the Additional IP Subnets screen appears.
"DHCP Server" on page 23
button. Your entries will be added to the IP Subnet List.
) is not enabled, the DHCP Start Address and DHCP End