Motorola VT2400 ADVANCED VOICE GATEWAY - SOFTWARE LICENSE WARRANTY Manual

Safety and Regulatory Information
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. THE UNIT
MUST NOT BE EXPOSED TO DRIPPING OR SPLASHING. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS
VASES, ON THE UNIT.
CAUTION: TO PREVENT ELECTRICAL SHOCK, THIS
EQUIPMENT MAY REQUIRE A GROUNDING CONDUCTOR IN
THE LINE CORD. CONNECT THE UNIT TO A GROUNDING
TYPE AC WALL OUTLET USING THE POWER ADAPTER
SUPPLIED WITH THE UNIT.
CAUTION: THIS PRODUCT WAS QUALIFIED UNDER TEST
CONDITIONS THAT INCLUDED THE USE OF THE SUPPLIED
CABLES BETWEEN SYSTEM COMPONENTS. TO ENSURE
REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE
PROVIDED POWER AND INTERFACE CABLES AND INSTALL
THEM PROPERLY.
CAUTION: DIFFERENT TYPES OF CORD SETS MAY BE USED
FOR CONNECTIONS TO THE MAIN SUPPLY CIRCUIT. USE
ONLY A MAIN LINE CORD THAT COMPLIES WITH ALL
APPLICABLE PRODUCT SAFETY REQUIREMENTS OF THE
COUNTRY OF USE.
CAUTION: INSTALLATION OF THIS PRODUCT MUST BE IN
ACCORDANCE WITH NATIONAL WIRING CODES AND
CONFORM TO LOCAL REGULATIONS.
CAUTION: DO NOT OPEN THE UNIT. DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN THE
INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS.
REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
When using this device, basic safety precautions should always be
followed to reduce the risk of fire, electric shock, and injury to
persons, including the following:
Read all of the instructions listed here and/or in the user
manual before you operate this equipment. Give particular
attention to all safety precautions. Retain the instructions for
future reference.
Software License, Warranty, Safety, and Regulatory Information
VT2442 Voice Gateway
This device must be installed and used in strict accordance
with the manufacturer's instructions as described in the user
documentation that comes with the product.
Comply with all warning and caution statements in the
instructions. Observe all warning and caution symbols affixed
to the equipment.
Comply with all instructions that accompany this equipment.
Do not overload outlets or extension cords, as this can result in
a risk of fire or electric shock. Overloaded AC outlets, extension
cords, frayed power cords, damaged or cracked wire insulation,
and broken plugs are dangerous. They may result in a shock or
fire hazard.
Route power supply cords so that they are not likely to be
walked on or pinched by items placed upon or against them.
Pay particular attention to cords where they are attached to
plugs and convenience receptacles, and examine the point
where they exit from the product.
Place this equipment in a location that is close enough to an
electrical outlet to accommodate the length of the power cord.
Place unit to allow for easy access when disconnecting the
power cord/adapter of the device from the AC wall outlet.
Do not connect the plug into an extension cord, receptacle, or
other outlet unless the plug can be fully inserted with no part of
the blades exposed.
Place this equipment on a stable surface.
Postpone installation until there is no risk of thunderstorm or
lightning activity in the area.
Avoid using this product during an electrical storm. There may
be a risk of electric shock from lightning. For added protection
for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from
the wall outlet. This will prevent damage to the product due to
lightning and power surges.
To avoid damaging the equipment by local lightning strikes and other
electrical surges, we recommend that the customer install an AC
surge protector in the AC outlet to which this device is connected.
Do not cover the device or block the airflow to the device with
any other objects. Keep the device away from excessive heat
and humidity and keep the device free from vibration and dust.