Wan Configuration - Motorola VT2142 User Manual

Overview

WAN Configuration

1
Log in to the VT2142 (see
2
Click SETUP.
3
Click WAN Configuration.
4
From the Type drop-down list, choose one of:
PPPoE PPPoE is used with all DSL modems
Static For some cable modems, the cable company assigns the
cable modem a static (unchanging) IP address. You must
provide the IP address, subnet mask, default gateway,
and one to three domain name server (DNS) addresses.
DHCP Most cable modems have a dynamic IP address assigned
by the cable company DHCP server. Typically no
additional configuration is needed for the VT2142.
VT2142 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
"Logging In to the VT2142"
Contact FAQ
Basic Advanced TCP/IP
on page 12).
See "WAN Setup for PPPoE (DSL)"
page 16
See "WAN Setup for a Static IP Address
(Cable Modem)"
See
"WAN Setup for a Static IP Address
(Cable Modem)"
Glossary License
on
on page 17
on page 19
15