Basic Configuration; Logging In To The Vt2142 - Motorola VT2142 User Manual

Overview

Basic Configuration

The VT2142 provides a graphical user interface (GUI) to configure Ethernet, router, DHCP, and security settings.
It is much easier to configure your local area network (LAN) using a VT2142 than with traditional networking
equipment. For basic operation, most default settings require no modification.
The following sections describe:
•

Logging In to the VT2142

•
Configuration Overview
•
Restarting the VT2142
•
Logging Out (see page 14)
•
WAN Configuration
•
LAN Configuration (see page 20)
If DHCP is enabled on all of the computers on your network (LAN), you do not need to change any of the default
LAN settings. Unless you have sufficient networking knowledge, we recommend not changing any LAN settings.
For information about advanced configuration, see
Logging In to the VT2142
On a computer connected to the VT2142, open a Web browser.
1
In the Address or Location field, type http://192.168.15.1 and press
2
In the Username field, type router.
3
In the Password field, type the password (the default is "router").
4
Click Log In to display the HOME page:
5
If you have difficulty logging in, see
VT2142 Voice Gateway User Guide
Installation Troubleshooting
Configuration:
(see page 12)
(see page 13)
(see page 14)
(see page 15)
"Troubleshooting"
Contact
Basic Advanced
"Advanced Configuration"
ENTER
on page 64.
FAQ Glossary
TCP/IP
on page 22.
to display the Log In page.
License
12