Overview
IP QoS
IP quality of service (QoS) enables you to assign priority to Internet traffic based on the source and destination IP
addresses, source and destination ports, packet length, and protocol.
IP QoS fields and buttons
Field or Button
Description
If selected, traffic prioritization is enabled (the default).
Enable IPQoS
If enabled (the default), all IP QoS traffic rules are applied first, regardless of the TOS bit
Trusted Mode
settings. After the rules are exhausted, the existing TOS bit settings are honored.
If disabled, all rules are also applied, except if there is no match, a default rule of queuing
priority Low is used.
Displays the
Add
VT2142 Voice Gateway User Guide
Installation
Troubleshooting
Configuration:
IP QoS Traffic Rule
window, where you can define rules.
Contact
FAQ
Basic
Advanced
TCP/IP
Glossary
License
This table
displays all
defined
rules
24