Table of Contents
Advertisement
9.
On the Replace Existing Server dialog box select Yes to finalize your new configuration.
Completing the restore on a file serving node
Complete the following steps:
1.
Ensure that you have root access to the node. The restore process sets the root password to
hpinvent, the factory default.
2.
Verify information about the node you restored:
ibrix_server -f [-p] [-M] [-N] -h SERVERNAME
3.
If you disabled NIC monitoring before using the QuickRestore, re-enable the monitor:
ibrix_nic -m -h MONITORHOST -A DESTHOST/IFNAME
For example:
ibrix_nic -m -h titan16 -A titan15/eth2
4.
Configure Insight Remote Support on the node. See
on StoreAll systems" (page
5.
Run ibrix_health -l from the StoreAll management console to verify that no errors are
being reported.
142 Recovering a file serving node
18).
"Configuring HP Insight Remote Support
Advertisement
Table of Contents
Troubleshooting
