Table of Contents
Advertisement
Configuring HA on a NIC
On the NIC HA Config dialog box:
1.
Select Enable NIC Monitoring.
2.
Select the NIC to be the standby NIC to the backup server (the server listed in the Standby
Server box). The standby NIC you select must valid and available.
If you need to create a standby NIC, select New Standby NIC in this box, which opens the
Add NIC dialog box. Enter the applicable details and then return to the NIC HA Config dialog
box.
3.
Click OK when finished. The NIC HA configuration is now complete.
Configuring High Availability on the cluster
45
Advertisement
Table of Contents
Troubleshooting
