Troubleshooting; Ilo Remote Console Does Not Respond To Keystrokes; The Ibrix_Auth Command Fails After A Restore - HP StoreAll 8800 Administrator's Manual

1. Take the appropriate actions:
If Active Directory authentication is used, join the restored node to the AD domain
manually.
If Local user authentication is used, create a temporary local user on the GUI and apply
the settings to all servers. This step resynchronizes the local user database. Then remove
the temporary user.
2. Run the following command:
ibrix_ftpconfig -R -h HOSTNAME
3. Verify that HTTP services have been restored. Use the GUI or CLI to identify a share served
by the restored node and then browse to the share.
All Vhosts and FTP shares should now be restored on the node.

Troubleshooting

iLO remote console does not respond to keystrokes

You need to use a local terminal when performing a recovery because networking has not yet
been set up. Occasionally when using the iLO integrated remote console, the console will not
respond to keystrokes.
To correct this situation, remove and reseat the blade. The iLO remote console will then respond
properly. Alternatively, you can use a local KVM to perform the recovery.

The ibrix_auth command fails after a restore

If the ibrix_auth command fails after a restore of a server in a cluster with a message similar
to the following:
ibrix_auth -n IBRQA1.HP.COM -A administrator@ibrqa1.hp.com -P password
-h hostnameX
nl
Iad error on host hostnameX failed command (<HIDDEN_COMMAND>) status
(1) output: (Joining to AD Domain:IBRQA1.HP.COM With Computer DNS Name:
hostsnameX.ibrqa1.hp.com )
Verify that the content of the /etc/resolve.conf file is not empty. If the content is empty, copy
the contents of the /etc/resolve.conf file on another server to the empty resolve.conf
file.
144 Recovering a file serving node