Equipment Symbols; Rack Warnings And Precautions - HP StoreAll 8800 Administrator's Manual

Equipment symbols

If the following symbols are located on equipment, hazardous conditions could exist.
WARNING!
Any enclosed surface or area of the equipment marked with these symbols indicates the presence
of electrical shock hazards. Enclosed area contains no operator serviceable parts. To reduce the
risk of injury from electrical shock hazards, do not open this enclosure.
WARNING!
Any RJ-45 receptacle marked with these symbols indicates a network interface connection. To
reduce the risk of electrical shock, fire, or damage to the equipment, do not plug telephone or
telecommunications connectors into this receptacle.
WARNING!
Any surface or area of the equipment marked with these symbols indicates the presence of a hot
surface or hot component. Contact with this surface could result in injury.
WARNING!
Power supplies or systems marked with these symbols indicate the presence of multiple sources of
power.
WARNING!
Any product or assembly marked with these symbols indicates that the component exceeds the
recommended weight for one individual to handle safely.

Rack warnings and precautions

Ensure that precautions have been taken to provide for rack stability and safety. It is important to
follow these precautions providing for rack stability and safety, and to protect both personnel and
property. Follow all cautions and warnings included in the installation instructions.
WARNING!
Observe local occupational safety requirements and guidelines for heavy equipment handling.
Obtain adequate assistance to lift and stabilize the product during installation or removal.
Extend the leveling jacks to the floor.
Rest the full weight of the rack on the leveling jacks.
Attach stabilizing feet to the rack if it is a single-rack installation.
Ensure the racks are coupled in multiple-rack installations.
Fully extend the bottom stabilizers on the equipment. Ensure that the equipment is properly
supported/braced when installing options and boards.
Be careful when sliding rack components with slide rails into the rack. The slide rails could
pinch your fingertips.
Ensure that the rack is adequately stabilized before extending a rack component with slide
rails outside the rack. Extend only one component at a time. A rack could become unstable
if more than one component is extended for any reason.
158 Warnings and precautions
To reduce the risk of personal injury or damage to the equipment: