Viewing Logs; Viewing Operating Statistics For File Serving Nodes - HP StoreAll 8800 Administrator's Manual

Result Information
----------------------------------------------------------------------------------------------
------------------
r38-s1 engine uuid matches on Iad and Fusion Manager
r38-s1 IP address matches on Iad and Fusion Manager
r38-s1 network protocol matches on Iad and Fusion Manager
r38-s1 engine connection state on Iad is up
r38-s2 engine uuid matches on Iad and Fusion Manager
r38-s2 IP address matches on Iad and Fusion Manager
r38-s2 network protocol matches on Iad and Fusion Manager
r38-s2 engine connection state on Iad is up
ifs1 file system uuid matches on Iad and Fusion Manager
ifs1 file system generation matches on Iad and Fusion Manager
ifs1 file system number segments matches on Iad and Fusion Manager
ifs1 file system mounted state matches on Iad and Fusion Manager
Superblock owner for segment 20 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 13 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 6 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 12 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 5 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 4 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 3 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 23 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 2 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 22 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 19 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 18 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 11 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 10 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 9 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 25 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 8 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 24 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 7 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 17 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 16 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 15 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 21 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 14 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager
Superblock owner for segment 1 of filesystem ifs1 on r38-s2 matches on Iad and Fusion Manager

Viewing logs

Logs are provided for the Fusion Manager, nodes, and StoreAll clients. Contact HP Support for
assistance in interpreting log files. You might be asked to tar the logs and email them to HP.

Viewing operating statistics for file serving nodes

Periodically, the file serving nodes report the following statistics to the Fusion Manager:
Summary. General operational statistics including CPU usage, disk throughput, network
throughput, and operational state. For information about the operational states, see
the status of file serving nodes" (page
IO. Aggregate statistics about reads and writes.
Network. Aggregate statistics about network inputs and outputs.
Memory. Statistics about available total, free, and swap memory.
CPU. Statistics about processor and CPU activity.
NFS. Statistics about NFS client and server activity.
The GUI displays most of these statistics on the dashboard. See
Console" (page 12)
To view the statistics from the CLI, use the following command:
ibrix_stats -l [-s] [-c] [-m] [-i] [-n] [-f] [-h HOSTLIST]
Use the options to view only certain statistics or to view statistics for specific file serving nodes:
-s Summary statistics
-c CPU statistics
-m Memory statistics
-i I/O statistics
-n Network statistics
90 Monitoring cluster operations
83).
for more information.
"Monitoring
"Using the StoreAll Management
------
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED
PASSED