HP 5920 Series Configuration Manual page 119

b. Select Access Service > Portal Service Management > Server from the navigation tree to enter
the portal server configuration page, as shown in
c. Configure the portal server parameters as needed.
This example uses the default values.
d. Click OK.
Figure 38 Portal authentication server configuration
2. Configure the IP address group:
a. Select Access Service > Portal Service Management > IP Group from the navigation tree to
enter the portal IP address group configuration page.
b. Click Add to enter the page shown in
c. Enter the IP group name.
d. Enter the start IP address and end IP address of the IP group.
Make sure the host IP address (2.2.2.2) is in the IP group.
e. Select a service group.
This example uses the default group Ungrouped.
f. Select Normal from the Action list.
g. Click OK.
Figure 39 Adding an IP address group
3. Add a portal device:
a. Select Access Service > Portal Service Management > Device from the navigation tree to enter
the portal device configuration page.
Figure
Figure 39.
108
38.