HP 5920 Series Configuration Manual page 36

Configure hostname-to-IP address mappings for the VPN by using the ip host or ipv6 host
•
command.
Configure a DNS server for the VPN by using the dns server or ipv6 dns server command.
•
For more information about these commands, see Layer 3—IP Services Command Reference.
To specify RADIUS accounting servers and the relevant parameters for a RADIUS scheme:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Specify RADIUS accounting
servers.
4. (Optional.) Set the maximum
number of real-time
accounting attempts.
Specifying the shared keys for secure RADIUS communication
The RADIUS client and server use the MD5 algorithm and shared keys to generate the Authenticator
value for packet authentication and user password encryption. They must use the same key for each type
of communication.
A key configured in this task is for all servers of the same type (accounting or authentication) in the
scheme, and has a lower priority than a key configured individually for a RADIUS server.
To specify a shared key for secure RADIUS communication:
Step
1. Enter system view.
2. Enter RADIUS scheme view.
3. Specify a shared key for
secure RADIUS
communication.
Command
system-view
radius scheme radius-scheme-name
•
Specify the primary RADIUS
accounting server:
primary accounting { host-name |
ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | vpn-instance
vpn-instance-name ] *
•
Specify a secondary RADIUS
accounting server:
secondary accounting { host-name |
ipv4-address | ipv6 ipv6-address }
[ port-number | key { cipher |
simple } string | vpn-instance
vpn-instance-name ] *
retry realtime-accounting retry-times
Command
system-view
radius scheme
radius-scheme-name
key { accounting | authentication }
{ cipher | simple } string
25
Remarks
N/A
N/A
By default, no accounting
server is specified.
The host-name argument is
available in Release 2310
and later versions.
Two accounting servers in a
scheme, primary or
secondary, cannot have the
same combination of
hostname, IP address, port
number, and VPN.
The default setting is 5.
Remarks
N/A
N/A
By default, no shared key is
specified.
The shared key configured on the
device must be the same as that
configured on the RADIUS server.