HP 5920 Series Configuration Manual page 26

Hide thumbs Also See for 5920 Series:
Table of Contents

Advertisement

No.
Attribute
28
Idle-Timeout
31
Calling-Station-Id
32
NAS-Identifier
40
Acct-Status-Type
45
Acct-Authentic
60
CHAP-Challenge
61
NAS-Port-Type
79
EAP-Message
80
Message-Authenticator
87
NAS-Port-Id
HP proprietary RADIUS sub-attributes
No.
Sub-attribute
1
Input-Peak-Rate
2
Input-Average-Rate
3
Input-Basic-Rate
Description
Maximum idle time permitted for the user before termination of the session.
User identification that the NAS sends to the server. For the LAN access
service provided by an HP device, this attribute includes the MAC address
of the user in the format HHHH-HHHH-HHHH.
Identification that the NAS uses to identify itself to the RADIUS server.
Type of the Accounting-Request packet. Possible values include:
1—Start.
2—Stop.
3—Interim-Update.
4—Reset-Charge.
7—Accounting-On. (Defined in the 3rd Generation Partnership Project.)
8—Accounting-Off. (Defined in the 3rd Generation Partnership Project.)
9 to 14—Reserved for tunnel accounting.
15—Reserved for failed.
Authentication method used by the user. Possible values include:
1—RADIUS.
2—Local.
3—Remote.
CHAP challenge generated by the NAS for MD5 calculation during CHAP
authentication.
Type of the physical port of the NAS that is authenticating the user. Possible
values include:
15—Ethernet.
16—Any type of ADSL.
17—Cable. (With cable for cable TV.)
19—WLAN-IEEE 802.1 1.
201—VLAN.
202—ATM.
If the port is an ATM or Ethernet one and VLANs are implemented on it, the
value of this attribute is 201.
Used to encapsulate EAP packets to allow RADIUS to support EAP
authentication.
Used for authentication and verification of authentication packets to
prevent spoofing Access-Requests. This attribute is present when EAP
authentication is used.
String for describing the port of the NAS that is authenticating the user.
Description
Peak rate in the direction from the user to the NAS, in bps.
Average rate in the direction from the user to the NAS, in bps.
Basic rate in the direction from the user to the NAS, in bps.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5900 series

Table of Contents