Configuring Snmp Notifications For Ipsec; Displaying And Maintaining Ipsec - HP 5920 Series Configuration Manual

Configuring SNMP notifications for IPsec

After you enable SNMP notifications for IPsec, the IPsec module notifies the NMS of important module
events. The notifications are sent to the device's SNMP module. You can configure the notification
transmission parameters for the SNMP module to specify how the SNMP module displays notifications.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To generate and output SNMP notifications for IPsec for a specific failure or event type, enable SNMP
notifications for IPsec globally and for the specified failure or event type.
To configure SNMP notifications for IPsec:
Step
1. Enter system view
2. Enable SNMP notifications
for IPsec globally.
3. Enable SNMP notifications
for the specified failure or
event type.

Displaying and maintaining IPsec

Execute display commands in any view and reset commands in user view.
Task
Display IPsec policy information.
Display IPsec policy template information.
Display IPsec profile information.
Display IPsec transform set information.
Display IPsec SA information.
Display IPsec statistics.
Display IPsec tunnel information.
Clear IPsec SAs.
Command
system-view
snmp-agent trap enable ipsec global
snmp-agent trap enable ipsec
[ auth-failure | decrypt-failure |
encrypt-failure | invalid-sa-failure |
no-sa-failure | policy-add |
policy-attach | policy-delete |
policy-detach | tunnel-start |
tunnel-stop ] *
Command
display ipsec { ipv6-policy | policy } [ policy-name
[ seq-number ] ]
display ipsec { ipv6-policy-template | policy-template }
[ template-name [ seq-number ] ]
display ipsec profile [ profile-name ]
display ipsec transform-set [ transform-set-name ]
display ipsec sa [ brief | count | interface interface-type
interface-number | { ipv6-policy | policy } policy-name
[ seq-number ] | profile policy-name | remote [ ipv6 ]
ip-address ]
display ipsec statistics [ tunnel-id tunnel-id ]
display ipsec tunnel { brief | count | tunnel-id tunnel-id }
reset ipsec sa [ { ipv6-policy | policy } policy-name
[ seq-number ] | profile policy-name | remote
{ ipv4-address | ipv6 ipv6-address } | spi { ipv4-address |
ipv6 ipv6-address } { ah | esp } spi-num ]
240
Remarks
N/A
By default, SNMP notifications for
IPsec are disabled.
By default, SNMP notifications for
all failure and event types are
disabled.