3/4" Raised Door Panel Routing - Monogram ZIFS360NHRH Installation Instructions Manual

3/4" RAISED DOOR PANEL ROUTING

For 3/4" raised door panel, routing is required. The router depth is 1/4" all the way around the panel back. Additional panel
width reductions are required per the diagrams below. This will create a "picture frame" routing that will slide onto the
attached door trim.
TOP
Front
Back
LEFT
SIDE
BOTTOM
3/4" PANEL SIDE VIEW
(AFTER ROUTING)
NOTE: For panels constructed with rails and stiles (5-panel), the minimum width is 3" for rails and 4" for stiles.
Design Guide - Flush Installation
DETAIL TOP
11/32"
1/4"
1/4"
DETAIL BOTTOM
DETAIL
LEFT SIDE
ROUTER DEPTH 1/4"
2-1/16"
3/4"
7/16"
1/4"
Front
Back
3/4" PANEL BOTTOM VIEW
(AFTER ROUTING)
27
NOTE: Routed areas should be
finished as the ma be visible
when assembled.
Front
Back
CORNER VIEW SHOWING
"PICTURE FRAME" ROUTING
DETAIL RIGHT
SIDE
ROUTER DEPTH 1/4"
2-1/16"
RIGHT
SIDE