Control; Read From Pipe To Output Window; Read From Pipe To File; E.7.1.12 Control - Motorola USB08 Reference Manual

Universal USB Device Driver (USBIO)

E.7.1.12 Control

E.7.1.13 Read from Pipe to Output Window

E.7.1.14 Read from Pipe to File

Designer Reference Manual
228
This dialog page allows to access user-defined control pipes. It cannot
be used to access the default pipe (endpoint zero) of an USB device.
Related driver interfaces:
• IOCTL_USBIO_PIPE_CONTROL_TRANSER_IN
• IOCTL_USBIO_PIPE_CONTROL_TRANSFER_OUT
This dialog page allows to read data from an Interrupt or Bulk pipe and
to dump it to the output window.For large amounts of data the transfer
may be slowed down because of the overhead involved with printing to
the output window. The printing of the data can be enabled/disabled by
the switch Print to Output Window.
Related driver interfaces:
• ReadFile();
• IOCTL_USBIO_ABORT_PIPE
This dialog page allows to read data from the pipe to a file. This transfer
type can be used for Isochronous pipes as well. The synchronization
type of the Isochronous pipe has to be "asynchronous". The application
does not support data rate feedback.
Related driver interfaces:
• ReadFile();
• IOCTL_USBIO_ABORT_PIPE
Universal USB Device Driver (USBIO)
(page
(page 177)
(page 177)
USB08 Evaluation Board
180)
(page 181)
MOTOROLA