Download Print this page

Motorola USB08 Reference Manual Page 231

Universal serial bus evaluation board using the mc68hc908jb8.
Hide thumbs


USB08 Evaluation Board
device. It is built from a bus identifier (USB), the 16-bit vendor ID
(VID), the 16-bit product ID (PID), and optionally the revision code
(REV). The IDs and the revision code are reported by the device
in he USB Device Descriptor.
If your device is not shown in the list make sure it is plugged in
properly and you have finished the New Hardware Wizard as
described above. You may use the Device Manager to check if the
device was enumerated by the system. The Device Manager can
be accessed by right-clicking the "My Computer" icon on the
desktop and then choosing Properties.
Use the Refresh button to rescan for active devices and to rebuild
the list.
To continue, click the Next button.
The next page shows detailed information about the selected USB
device. If a driver is already installed for the device information
about the driver is also shown. Verify that you selected the correct
device. If not, use the Back button to return to the device list and
select another device.
To install the USBIO driver for the selected device, click the Next
If you install the USBIO driver for a device that is currently controlled by
another device driver the existing driver will be disabled. This will happen
immediately. As a result, the device may no longer be used by the
operating system and by applications. If the device belongs to the HID
class, a mouse or a keyboard for example, this can cause problems.
On the last page the Installation Wizard shows the completion
status of driver installation. If the installation was successful the
USBIO driver is running. It has been dynamically loaded by the
operating system.
The USBIO Installation Wizard allows you to save the specific
driver installation file (INF) that it generated for the device. The INF
file is specific for the selected device because it contains the
Hardware ID of that device. You can use the button labeled "Save
INF file" to save the generated INF file with a name of your choice
Universal USB Device Driver (USBIO)
Universal USB Device Driver (USBIO)
Installation Issues
Designer Reference Manual



This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: