Ioctl_Usbio_Bind_Pipe - Motorola USB08 Reference Manual

Universal USB Device Driver (USBIO)

IOCTL_USBIO_BIND_PIPE

lpInBuffer
nInBufferSize
lpOutBuffer
nOutBufferSize
Comments
See Also
Designer Reference Manual
174
The IOCTL_USBIO_BIND_PIPE operation is used to establish a binding
between a file handle and a pipe object.
Pointer to a buffer that contains an USBIO_BIND_PIPE
structure. This data structure has to be filled completely by the caller.
Specifies the size, in bytes, of the buffer pointed to by lpInBuffer,
which has to be sizeof(USBIO__BIND_PIPE) for this operation.
Not used with this operation. Set to NULL.
Not used with this operation. Set to zero.
This pipe is identified by its endpoint address. Only endpoints from the
current configuration can be bound. After this operation is successfully
completed the pipe can be accessed using pipe related requests (e.g.
read or write).
IOCTL_USBIO_SET_CONFIGURATION
IOCTL_USBIO_GET_CONFIGURATION_INFO
Universal USB Device Driver (USBIO)
(page 207) data
(page 159) and
(page 166)
USB08 Evaluation Board
MOTOROLA