Comments
USB08 Evaluation Board
MOTOROLA
Interval
Specifies the interval, in milliseconds, for polling the endpoint for data
as reported in the corresponding endpoint descriptor. The value is
meaningful for interrupt endpoints only. Refer to the Universal Serial
Bus Specification 1.1, Chapter 9 for more information.
InterfaceNumber
Specifies the index of the interface the pipe belongs to. The value
corresponds to the field InterfaceNumber of an
USBIO_INTERFACE_CONFIGURATION_INFO
structure.
reserved1
Reserved field set to zero.
reserved2
Reserved field, set to zero.
reserved3
Reserved field, set to zero.
This structure is an output of
IOCTL_USBIO_GET_CONFIGURATION_INFO
Only active pipes from the current configuration are returned.
Universal USB Device Driver (USBIO)
Universal USB Device Driver (USBIO)
Programming Interface
(page
200)
(page
166) operations.
Designer Reference Manual
203