Ioctl_Usbio_Set_Device_Parameters - Motorola USB08 Reference Manual

IOCTL_USBIO_SET_DEVICE_PARAMETERS

lpInBuffer
nInBufferSize
lpOutBuffer
nOutBufferSize
Comments
USB08 Evaluation Board
MOTOROLA
The IOCTL_USBIO_SET_DEVICE_PARAMETERS operation is used to
set USBIO parameters related to a device.
Pointer to a buffer that contains an USBIO_DEVICE_PARAMETERS
(page 198) data structure. This data structure has to be filled completely
by the caller.
Specifies the size, in bytes, of the buffer pointed to be lpInBuffer,
which has to be sizeof(USBIO_DEVICE_PARAMETERS) for this
operation.
Not used with this operation. Set to NULL.
Not used with this operation. Set to zero.
The default state of the device parameters is defined by a set of registry
parameters which are read by the USBIO driver at startup.The current
state may be modified using this request.
Universal USB Device Driver (USBIO)
Universal USB Device Driver (USBIO)
Programming Interface
Designer Reference Manual
165