Ioctl_Usbio_Get_Pipe_Parameters - Motorola USB08 Reference Manual

Universal USB Device Driver (USBIO)

IOCTL_USBIO_GET_PIPE_PARAMETERS

lpInBuffer
nInBufferSize
lpOutBuffer
nOutBufferSize
Comments
Designer Reference Manual
178
The IOCTL_USBIO_GET_PIPE_PARAMETERS operation returns
USBIO settings related to a pipe.
Not used with this operation. Set to NULL.
Not used with this operation. Set to zero.
Pointer to a buffer that will receive an USBIO_PIPE_PARAMETERS
(page 208) data structure.
Specifies the size, in bytes, of the buffer pointed to by lpOutBuffer,
which has to be at least sizeof(USBIO_PIPE_PARAMETERS) for this
operation.
The default state of the pipe parameters is defined by a set of registry
parameters which are read by the USBIO driver at startup. The current
state can be queried by using this request.
Universal USB Device Driver (USBIO)
USB08 Evaluation Board
MOTOROLA