Download Print this page

Motorola USB08 Reference Manual: Usbio_bind_pipe

Universal serial bus evaluation board using the mc68hc908jb8.
Hide thumbs

Advertisement

USBIO_BIND_PIPE

Definition
Member
Comments
USB08 Evaluation Board
MOTOROLA
The USBIO_BIND_PIPE structure provides information about the pipe to
bind to.
typedef struct _USBIO_BIND_PIPE{
UCHAR EndpointAddress;
} USBIO_BIND_PIPE;
EndpointAddress
Specifies the address of the endpoint on the USB device that shall be
associated with the pipe. The endpoint address is specified as
reported in the corresponding endpoint descriptor.
The endpoint address includes the direction flag at bit position 7
(MSB).
Bit 7 = 1:
OUT endpoint
Bit 7 = 0:
IN endpoint
Refer to the Universal Serial Bus Specification 1.1, Chapter 9 for more
information.
This structure has to be used as an input for IOCTL_USBIO_BIND_PIPE
(page
174) operations. Only active endpoints from the current
configuration can be bound.
Universal USB Device Driver (USBIO)
Universal USB Device Driver (USBIO)
Programming Interface
Designer Reference Manual
207

Advertisement

Chapters

This manual also for:

Mc68hc908jb8

Comments to this Manuals

Symbols: 0
Latest comments: