Fuel Sender Test - Polaris 2005 Sportsman MV7 Service Manual

ELECTRICAL

FUEL SENDER TEST

1. Remove the fuel sender from the fuel tank. Refer
to Chapter
REMOVAL/INSTALLATION".
2. Stand the fuel sender on a flat surface.
3. Hook up an ohm meter to the fuel sender harness
(Brown & Purple / White).
4. With the sender float in the empty position, the
meter should read 5 ohms.
5. Slowly lift the sender float to the full position, the
meter should now read 90 ohms.
10.36
4 "FUEL SENDER
6. If the reading are not between 5 ohms and 90
ohms, or if the reading is erratic, replace the fuel
sender.