5. Apply Crankcase Sealant (PN 2871557) to
surface of case and install cover bolts. Install the
gearcase cover onto the gearcase housing.
Torque the cover bolts to 25 ft. lbs. in a criss cross
pattern.
Gearcase Cover Bolt Torque:
25 ft. lbs. (34 Nm)
6. Install the drain plug and fill plug. Replace the
drain plug washers to ensure proper sealing after
filling.
14--18 ft.lbs.
(19--24 Nm)
REAR GEARCASE
INSTALLATION
1. To install the rear gearcase, reverse the removal
2. Torque the installation bolts and nuts to the
3. Refer to Chapter 2 for rear gearcase fluid fill.
Drain Plug
procedures.
torques specified.
FINAL DRIVE
7.29