Polaris 2005 Sportsman MV7 Service Manual page 178

CLUTCH
inward. Remove snap ring (A).
5. Remove the spider assembly, spring (B), and
spacer washer (C).
compression spring only and has no torsional
wind.
B
C
SPIDER DISASSEMBLY
6. Remove the inside spider plate (D) and spider
dampener (E). Inspect the spider dampener (E)
for wear and replaced if needed.
6.20
Press Down
on Spider
NOTE: The spring is a
E
7. Remove the E--clip (F), washer (G), and the
clutch rollers (H). Inspect the rollers for wear
replace if worn.
8. Remove the clutch assembly from the holding
tool. Remove the large outer retaining ring (I) and
the inner retaining ring (J).
I
D
H
G
F
J