Polaris 2005 Sportsman MV7 Service Manual page 101

NOTE: Be sure to place the tapered end of the valve
(dowel) in first. If the valve is installed incorrectly, oil
pressure and oil priming problems will occur.
DISASSEMBLY OF WATER/OIL PUMP SHAFT
WARNING
Wear appropriate safety gear
during this procedure.
clothing and eyewear are required.
32. Carefully press the gear off the assembly while
supporting the housing assembly.
33. Remove the snap ring from the assembly. Place
the housing in a support and press out the
bearing/shaft assembly.
Press out
shaft and
bearing
assembly
Protective gloves,
Press off gear
Bearing
Retaining Ring
34. Place the shaft in a press to remove the bearing.
Bearing
ENGINE
3.43