RECOIL INSPECTION
CAUTION: The recoil is under spring tension. A face
shield and eye protection is required during this
procedure.
Replace any parts found to be worn or damaged.
1. Pull recoil rope so it is extended approximately
12-18". Check handle c-ring for proper tension,
and the handle for cracks or damage which may
allow water or dirt to enter the recoil housing
through the rope. NOTE: The handle must seal
tightly on the recoil housing to prevent water from
entering.
2. If the recoil is damaged or worn, replace the recoil
assembly as needed. Refer to your parts book for
the proper part number..
Inspect Recoil Housing
Rope
C--ring
ENGINE
3.57