Summary Of The Functions In The Service Menu - Pfaff 3582-2/01 Instruction Manual

Adjustment
12

Summary of the functions in the service menu

.05.29
Select the service menu with the Technics/Service function .
12 - 32
Service settings (code entry required, 8 x "1")
A - Needle thread cutter / clamp
B - Middle knife
C Interfacing feed
D - Stacker (time)
E - 2 nd service level (code entry required, 8 x "9")
A - Clamp speed and clamp insertion to seam beginning
B - Bartacking
C - (R1)
Clamp speed, position for cutting needle thread and path to first mitre cut
(R2)
Clamp speed and path to second mitre cut
D - Speed "reverse clamp" and rear end position of the clamps
H - Setting safety length flap
Encoder – seam length correction
F - back to basic display
Output test
Backtacking settings
Back to basic display
Select/reset piece counter
Display setting (language(contrast)
Adjustment flaps / main clamps
Closing order of the flap clamps (see Chapter 7.05 Foot switch)
Closing order of the main clamps (see Chapter 7.05 Foot switch)
Sensor and stacker on/off (see Chapter 7.05 Foot switch)
Vacuum and trouser stamp on/off (see Chapter 7.05 Foot switch)
Needle thread monitor on/off (see Chapter 7.05 Foot switch)
Bobbin thread counter on/off
Machine information