Table of Contents
Advertisement
Sewing
8
Description of the functions
.04
After the production function has been selected, the following menu appears.
Work instructions
After this function has been selected, the work instructions for the selected seam program
are
Display of the seam sectors
The seam sectors of the seam program are shown in sector 1.
The docu-seam sector 2 is shown in red.
Seam sector 3 is the seam sector currently being processed.
Display of the monitoring functions
The symbols in sector 4 are used to shown the monitoring functions specifi ed for the seam
sector in the seam program. Inactive functions are shown in light grey. The following indivi-
dual monitoring functions can be activated:
Thread force
After this function has been selected, the values for the set limit values of the thread
strength and the tolerance range for missed stitches are shown.
Sewing parameters
After this function has been selected, the sewing parameters are displayed. The sewing pa-
rameters are specifi ed during the seam program input, see Short Instructions for the input.
Action at beginning of the seam sector
The symbol shows the action at the beginning of the seam sector (here, for example, start
bartacks). The action for the beginning of the seam sector is specifi ed during the seam pro-
gram input, see Short Instructions for the input.
30
displayed.
- Docu-seam sector
- Missed stitch detection
- Edge guide recognition (optional)
Industrial
1
3
2
4
5
Advertisement
Table of Contents
