Replacing Valve Guide - Mitsubishi S6S-Y3T61HF Service Manual

1.3 Replacing valve guide

CAUTION
Because valve guides must be inserted to the speci-
fied amount, be sure to use a valve guide installer.
(1) To remove valve guides, use a valve guide remover.
(2) To press-fit valve guides, use a valve guide installer.
(3) Check contacts between valves and valve seats after
replacing valve guides.
INSPECTION AND REPAIR OF BASIC ENGINE
Valve guide remover
P/N:32A91-00300
Pulling out valve guide
Press
Valve guide installer
P/N:32A91-00100
Press fitting valve guide
13.9 to 14.1 mm
[0.547 to 0.555 in.]
6-3