Installing Camshaft Gear And Thrust Plate; Installing Camshaft; Installing Pto Drive Gear - Mitsubishi S6S-Y3T61HF Service Manual

2.3 Installing camshaft gear and thrust plate

CAUTION
Be careful not to damage the cam of the camshaft or
bushing.
Warm the camshaft gear and insert the thrust plate without
fail when installing the gear.

2.4 Installing camshaft

CAUTION
Be careful not to damage camshaft journals, cams and
camshaft holes during insertion.
(1) Apply engine oil to the camshaft journals and cams.
(2) Slowly insert the camshaft assembly.
(3) Tighten the thrust plate bolt to the specified torque.
(4) Make sure that the camshaft rotates lightly. Move the
camshaft gear back and forth, and make sure there is
end play.

2.5 Installing PTO drive gear

(1) Press fit the bearing into the PTO drive gear.
(2) Install the PTO drive gear with bearing to the bearing
case.
(3) Install the PTO gear as assembly with the bearing case
to the front plate.
REASSEMBLY OF BASIC ENGINE
Camshaft gear
Camshaft
Installing camshaft gear and thrust plate
11.5 ± 1.5 N·m
{1.15 ± 0.15 kgf·m}
[8.3 ± 1.1 lbf·ft]
Installing camshaft
S6S-Y3T61HF
Installing PTO drive gear
Press fit with
hydraulic press
Thrust plate
7-9