Removing Crankshaft; Removing Tappet - Mitsubishi S6S-Y3T61HF Service Manual

4.7 Removing crankshaft

CAUTION
Be careful not to damage bearings when removing the
crankshaft.
(1) Slowly lift the crankshaft straight up.
(2) Arrange the bearings in the order of disassembly so that
their original positions are restored when reassembling.
Note: (a) When raising the crankshaft, do not allow wire or
chain to come into contact with the crankshaft.
To avoid damage to the crankshaft when raising,
use a cloth belt or pad.
(b) Mark the bearings with their cylinder numbers.

4.8 Removing tappet

Remove the tappets using a magnet.
Note: Be sure to arrange the removed tappets for
reassembling to the same tappet hole.
DISASSEMBLY OF BASIC ENGINE
Removing crankshaft
5-17