Installing Front Oil Seal; Installing Timing Gear Case; Installing Oil Strainer - Mitsubishi S6S-Y3T61HF Service Manual

REASSEMBLY OF BASIC ENGINE

2.10 Installing front oil seal

Using an installer, install new oil seal in the timing gear
case. Make sure the oil seal is flush with the gear case.

2.11 Installing timing gear case

(1) Aligning with the dowel pins, install the gasket to the
crankcase.
(2) Apply engine oil to the oil seal lip.
(3) Install the timing gear case and tighten the bolts.
(4) Cut the gasket protruding from crankcase bottom side
with cutter.

2.12 Installing oil strainer

Install a new O-ring to the oil strainer, and install the oil
strainer to the crankcase.
7-12
Installer
Installing front oil seal
S6S-Y3T62HF
Gasket
Timing gear case
18.5 ± 1.5 N·m
{1.85 ± 0.15 kgf·m}
[13.4 ± 1.1 lbf·ft]
Installing timing gear case
S6S-Y3T61HF
Gasket
Timing gear case
18.5 ± 1.5 N·m
{1.85 ± 0.15 kgf·m}
[13.4 ± 1.1 lbf·ft]
Installing front plate
Oil strainer
Installing oil strainer