Back - Fujitsu fi-6800 Operator's Manual

Chapter 1 Scanner Overview

Back

Ventilation Port
An outlet for ventilating hot air from inside the scanner.
Power Connector
A connector for the power cable.
Main Power Switch
Powers ON/OFF the scanner.
SCSI ID Switch (fi-6800)
Used to configure the SCSI ID (Factory default setting: 5).
SCSI Connector (fi-6800)
For connecting a SCSI cable.
USB Connector
For connecting a USB cable.
VRS Board (optional) slot (fi-6800)
For connecting the VRS board (optional) to use Kofax VRS
(optional).
For details, refer to "A.4 Scanner Options" (page
Contents
Introduction
Scanner
Overview
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
188).
Operational
Settings
Appendix
TOP
Index
Glossary
14