Settings Related To Power On/Off Control; Setting The Paper Separation Force Upon; [Retain Current Paper Thickness] - Fujitsu fi-6800 Operator's Manual

Chapter 8 Operational Settings

8.7 Settings Related to Power ON/OFF Control

Setting the Paper Separation Force upon Turning
the Power Off

[Retain current paper thickness]

Specify whether or not to memorize the paper separation force
setting of the operator panel upon turning the power off.
1
Start up the Software Operation Panel.
Refer to "8.1 Starting Up the Software Operation Panel" (page
2
From the listing on the left, click [Device Setting 2] 
[Retain current paper thickness].
3
Specify whether or not to memorize the paper separation
force setting of the operator panel upon turning the power
off.
When [Remember] is selected, you can use the memorized setting
next time the scanner is powered on.
132).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use
the Operator
Panel
Various Ways
to Scan
Daily Care
Replacing
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
179