Safety Recommendations; Examining The Installation Site - HP 5130 EI Switch Series Installation Manual

Product code
JG933A
JG934A
JG936A
JG937A
JG938A
JG939A
JG940A
JG941A
JG975A
JG976A
JG977A
JG978A

Safety recommendations

To avoid equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition.
Before cleaning the switch, remove all power cords from the switch. Do not clean the switch with wet
•
cloth or liquid.
• Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
Do not place the switch on an unstable case or desk.
•
• Ensure good ventilation at the installation site and keep the air inlet and outlet vents of the switch
free of obstruction.
Connect the yellow-green protection grounding cable before power-on.
•
Make sure the power source voltage is as required.
•
• To avoid electrical shocks, do not open the chassis while the switch is operating or when the switch
is just powered off.
To avoid ESD damage, wear an ESD wrist strap to hot-swap a power supply.
•

Examining the installation site

The HP 5130 EI switches must be used indoors. You can mount your switch in a rack or on a workbench,
but make sure:
Adequate clearance is reserved at the air inlet and exhaust vents for ventilation.
•
The rack or workbench has a good ventilation system.
•
The rack is sturdy enough to support the switch and its accessories.
•
The rack or workbench is reliably grounded.
•
RMN HP description
BJNGA-AD0028 HP 5130-24G-SFP-4SFP+ EI Switch
BJNGA-AD0029 HP 5130-48G-4SFP+ EI Switch
BJNGA-AD0031 HP 5130-24G-PoE+-4SFP+ (370W) EI Switch
BJNGA-AD0032 HP 5130-48G-PoE+-4SFP+ (370W) EI Switch
BJNGA-AD0033 HP 5130-24G-2SFP+-2XGT EI Switch
BJNGA-AD0034 HP 5130-48G-2SFP+-2XGT EI Switch
BJNGA-AD0035 HP 5130-24G-PoE+-2SFP+-2XGT (370W) EI Switch
BJNGA-AD0036 HP 5130-48G-PoE+-2SFP+-2XGT (370W) EI Switch
BJNGA-AD0027 HP 5130-24G-4SFP+ EI BR Switch
BJNGA-AD0028 HP 5130-48G-4SFP+ EI BR Switch
BJNGA-AD0031 HP 5130-24G-PoE+-4SFP+ (370W) EI BR Switch
BJNGA-AD0032 HP 5130-48G-PoE+-4SFP+ (370W) EI BR Switch
2