1/10Gbase-T Autosensing Ethernet Port Leds - HP 5130 EI Switch Series Installation Manual

Switch model
•
HP
5130-24G-PoE+-2SFP+-2
XGT (370W) EI

1/10GBase-T autosensing Ethernet port LEDs

The HP 5130-48G-2SFP+-2XGT EI and HP 5130-48G-PoE+-2SFP+-2XGT (370W) EI switches provide
•
a double-color (green and yellow) LED for each 1/10GBase-T autosensing Ethernet port to indicate
its operating status.
Port mode
LED
LED
(Mode)
status
Yellow LED
Green LED
Flashing
green (PoE
mode)
Yellow LED
53
Status Description
No link is present on the
port, or the port is not
Off
operating at 1000
Mbps.
The port is operating at
Steady on 10/100 Mbps, and a
link is present on the port.
The port is sending or
Flashing (not 3
receiving data at
Hz)
10/100 Mbps.
Flashing
The port has failed POST.
yellow (3 Hz)
No link is present on the
port, or the port is not
Off
operating at 10/100
Mbps.
The port is supplying PoE
Steady on
correctly.
•
The PD power
requirement exceeds
the port PoE capacity.
•
The port fails to meet
Flashing (3 Hz)
the power
requirement of the PD
because of power
insufficiency of the
switch.
The port is not supplying
Off
PoE power.
A non-PD device is
attached to the port, or
Steady on
the port is experiencing a
PoE failure.
Flashing (3 Hz) The port has failed POST.
The port is not supplying
Off
PoE power.