100/1000Base-X Sfp Port - HP 5130 EI Switch Series Installation Manual

Table 14 1/10GBase-T autosensing Ethernet port specifications
Item
Connector type
Interface attributes
Transmission medium and max
transmission distance
Compatible standards
To avoid packet loss caused by interferences, HP recommends that you layer cables as follows:
Use category-6A or above cables and connectors.
•
Do not bundle cables in their first 20 m (65.62 ft).
•
Separate power cords and twisted pair cables at and around the distribution frame.
•
• For ports adjacent to one another on the device, the peer ports on the distribution frame is
preferably not adjacent, for example:
If the device connects to one distribution frame, connect port 1 on the device to port 1 on the

distribution frame and port 2 on the device to port 3 on the distribution frame.
If the device connects to two distribution frames, connect port 1 on the device to port 1 on

distribution frame 1 and port 2 on the device to port 1 on distribution frame 2.
Keep the device and twisted pair cables away from the interference source, such as a two-way
•
radio and a high-power variable-frequency drive.

100/1000Base-X SFP port

The HP 5130-24G-SFP-4SFP+ EI switch provides 24 100/1000Base-X SFP ports, and you can install the
100 Mbps SFP transceiver modules in
the SFP ports as needed.
Table 15 100 Mbps SFP transceiver modules available for the SFP ports
Product
code
JD102B
JD120B
JD090A
JD091A
Specification
RJ-45
1/10 Gbps, full duplex, MDI/MDI-X autosensing
•
•
•
•
•
Central
HP description wavelength
(nm)
HP X115 100M SFP
1310
LC FX Transceiver
HP X110 100M SFP
1310
LC LX Transceiver
HP X110 100M SFP
1310
LC LH40 Transceiver
HP X110 100M SFP
1550
LC LH80 Transceiver
55 m (180.45 ft) over category-6 unshielded twisted pair cable
100 m (328.08 ft) over category-6 shielded twisted pair cable
100 m (328.08 ft) over category-6A or above twisted pair cable
IEEE 802.3ab
IEEE 802.3an
Table 15 and 1000 Mbps SFP transceiver modules in
Connector
LC
LC
LC
LC
46
Fiber diameter (µm)
Multi-mode, 50/125
Multi-mode,
62.5/125
Single-mode, 9/125
Single-mode, 9/125
Single-mode, 9/125
Table 16 in
Max
transmission
distance
2 km (1.24
miles)
15 km (9.32
miles)
40 km (24.86
miles)
80 km (49.71
miles)