Engine/Transmission Oil - Filter - Arctic Cat 2015 XR Service Manual

2. Using a suitable brush, clean the carbon deposits
from the screen taking care not to damage the screen.
 NOTE: If the screen or gasket is damaged in any
way, it must be replaced.
3. Install the spark arrester assembly with gasket; then
secure with the three cap screws. Tighten to 48 in.-lb.
Engine/Transmission
Oil - Filter
OIL - FILTER
The engine should always be warm when the oil is
changed so the oil will drain easily and completely.
1. Park the ATV on level ground.
2. Remove the oil level stick/filler plug.
550/700
CF105A
3. Remove the drain plug from the bottom of the engine
and drain the oil into a drain pan.
CF104
4. Using the adjustable Oil Filter Wrench and a suitable
wrench, remove the old oil filter.
 NOTE: Clean up any excess oil after removing the
filter.
5. Apply oil to a new filter O-ring and check to make
sure it is positioned correctly; then install the new oil
filter. Tighten securely.
 NOTE: Install a new O-ring each time the filter is
replaced.
CF109M
500
KC372A
733-441A
9