Arctic Cat 2015 XR Service Manual page 149

5. Using a seal removal tool, remove the input shaft
seal. Account for a spacer.
6. Remove the snap ring securing the input shaft bear-
ing; then place the pinion housing in a press and
remove the bearing.
CD107
Assembling Input Shaft
1. Place the pinion housing in a press and install the
input shaft bearing. Secure the bearing with the
existing snap ring making sure the sharp edge of the
snap ring faces to the outside.
GC010
GC011
2. Install the input shaft seal making sure it is fully
seated in the housing.
AF984
KX219
GC012
GC011
147