After Use; Interrupting Operation - Miele DGC 6860 Operating And Installation Instructions

After use

 Remove and empty the water con‐
tainer and condensate container.
Push upwards slightly as you take
them out of the appliance.
 Switch the steam oven off using .
Following a cooking programme with
steam
Appliance rinsing
display after the steam oven has been
switched off.
This process should be carried out
every time to flush any remaining
food deposits out of the system.
 Follow the instructions in the display.
 After each use, clean and dry the
whole appliance as described in
"Cleaning and care".
 Leave the appliance door open until
the oven interior is completely dry.
Insufficient water
If water needs replenishing during the
programme a tone will sound and a re‐
minder to refill the container will appear
in the display.
 Remove the water container and fill it
with fresh tap water.
 Push the water container into the ap‐
pliance until it connects.
Operation will continue.
Operation: Combination cooking mode
will appear in the

Interrupting operation

Operation is interrupted as soon as the
door is opened. The heating will switch
off and the cooking duration remaining
stored in memory.

Danger of burning.
Steam can escape when the door is
opened.
Step back and wait until the steam
has dissipated.

Danger of burning.
You could burn yourself on the oven
interior walls, spilled food and hot
steam.
Wear oven gloves when placing food
in the oven or removing it and when
adjusting oven shelves etc. in a hot
oven
Operation will resume when the door is
closed.
The oven will heat up again and the dis‐
play will show the temperature of the
cooking compartment as it rises. Once
the set temperature has been reached,
the display will change to show the
cooking duration remaining as it counts
down.
For cooking programmes with 100 %
moisture and temperatures up to
100 °C:
The cooking programme will finish
early if the door is opened in the last
minute of cooking time (55 seconds
duration remaining).
47