Advanced Operation; Switching On And Off Automatically - Miele DGC 6860 Operating And Installation Instructions

Advanced operation

Setting further durations
You have placed the food in the oven,
selected a temperature and a duration.
You can set the programme to switch
on and off automatically by setting
or
Ready at Start at
–
Ready at
You specify the time you want cook‐
ing to stop.
–
Start at
You specify the time you want cook‐
ing to start.
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
If the temperature in the oven is too
high, e.g. just after another pro‐
gramme, you will not be able to use
this function.
Ready at
appear in the display if this is the
case. Open the oven door until the ap‐
pliance has cooled down.
A time cannot be entered if
Ready at
you are using the food probe. When
using the food probe, the end of the
cooking duration is determined by
when the set core temperature is
reached. Only
Start later
ted.
.
/ will not
Start at
can be selec‐
Operation: Steam cooking

Switching on and off automatically

To switch a cooking programme on and
off automatically you have a choice of
how to enter the time parameters:
– and
Duration Ready at
– and
Duration Start at
Example: it is 11:45. The food takes
5 minutes to cook and should be ready
at 12:30.
 Set a time of 00:05 in the
field.
 Set a time of 12:30 in the
field.
 Confirm with OK.
is calculated automatically. The
Start at
cooking duration entered is added to
the heating-up time calculated by the
steam oven.
12:18 appears in the display.
Start at
The cooking process will start automat‐
ically at this time.
Duration
Ready at
41