Perfectclean - Miele DGC 6860 Operating And Installation Instructions

PerfectClean

The oven interior and side runners are
made from stainless steel which has
been treated with a special Perfect‐
Clean finish which gives the surface an
iridescent appearance. PerfectClean
surfaces have very good non-stick
properties and are easy to clean.
However, it is very important to clean
the surfaces each time the oven is
used.
The surface will become harder to clean
and the non-stick properties will deteri‐
orate if soiling is not removed after each
use and allowed to build up.
Soiling such as spilt juices and cake
mixtures are best removed whilst the
oven or tray is still warm. Exercise cau‐
tion, make sure the oven is not hot.
Spilt fruit juices may cause discoloura‐
tion of the surfaces. This discolouration
is permanent but will not affect the effi‐
ciency of the surface.
Remove residual cleaning agent after
cleaning. If left it will reduce the non-
stick properties of the PerfectClean
surfaces.
Cleaning and care
To protect the non-stick effect of
PerfectClean surfaces please avoid:
– abrasive cleaning agents, e.g. pow‐
der cleaners and cream cleaners
– cleaning agents for ceramic hobs
– ceramic and stainless steel hob
cleaner
– wire wool
– abrasive sponges, e.g. pot scourers
or sponges which have been previ‐
ously used with abrasive cleaning
agents
– oven sprays
– cleaning in the dishwasher
– pot cleaning
153