Setting Range Correction - Toshiba e-STUDIO351c Service Handbook

Multifunctional digital color systems

Hide thumbs Also See for e-STUDIO351c:

Table of Contents

Setting range correction

The values of the background peak / text peak in the range correction at the Black Mode can be

switched to "varied" or "fixed" in the following codes.

If they are fixed, the range correction is performed with standard values.

The values of the background peak affects the reproduction of the background density and the values

of the text peak affects that of the text density.

Original mode

Procedure is same as that of "3.7.2 Density adjustment (Black Mode)".

Setting range correction (Adjustment of background peak)

The levels of the background peak for the range correction at the Black Mode can be set at the follow-

Original mode

Procedure is same as that of "3.7.2 Density adjustment (Black Mode)".

Range correc-

The following are the default values set for each origi-

tion for original

manually set on

Photo/Text: 12, Text: 12, Photo: 12, Gray Scale: 12

the original glass

Each digit stands for:

Ones place: Automatic density mode

Range correc-

Tens place: Manual density mode

tion for original

The setting conditions possible are as follows:

set on the RADF

When the value increases, the background (low density

peak for range

section) of the image is not output.

Acceptable vales: 0 to 255

(Default: Text/Photo: 56, Text: 48, Photo: 16, Gray

Background peak

e-STUDIO281c/351c/451c ADJUSTMENT

E-studio281c E-studio451c