Toshiba e-STUDIO351c Service Handbook page 575

(3) Remove 1 screw and take off the finisher board access cover.
(4) Release the latches and take off the rear lower cover of the hole punch unit.
(5) Remove 3 screws and take off the rear cover of the hole punch unit.
June 2005 © TOSHIBA TEC
Board access cover
Fig. 6-33
Rear lower cover
Fig. 6-34
Rear cover
Fig. 6-35
6 - 31
06/08
e-STUDIO281c/351c/451c FIRMWARE UPDATING
6