HowToStartShift; HowToEndShift - Ingenico i5100 Eftpos Operating Manual

6.3 How to Start Shift
The terminal can manage up to 10 different users, the first (User 01) being
referred to as the shift leader. The shift leader must start a shift before the other
users. For each user, the terminal stores the number of transactions, the total
transaction amount and the tip amount. When the shift/user reports are printed,
the terminal indicates the date and time the totals were started and ended.
TERMINAL DISPLAY
22/05/2009 12.54
ENTER AMOUNT
FUNCTION?
ENTER USER ID
PASSWORD:
USER MANAGEMENT
SHIFT STARTED
6.4 How to End Shift
This function will end the shift and print an 'End of Shift' report.
TERMINAL DISPLAY
22/05/2009 13.16
ENTER AMOUNT
FUNCTION?
PASSWORD:
END SHIFT
CORRECT?
END SHIFT
PRINTING
42 Dial-up EFTPOS Merchant Operating Guide – May 2011
PROCEDURE
Press the Function (FUNC) button.
Key in 61 and press ENTER.
Enter the User ID (01-10) and press ENTER.
The user is required to enter their 4 digit code.
The terminal confirms that User ID has been
recorded.
PROCEDURE
Press the Function (FUNC) button.
Key in 62 and press ENTER.
Key in the terminal or shift leader password and
press ENTER.
Press ENTER to end the Shift.
YES/NO
The terminal will now print the end Shift Report.