Page 1
250 Setup Guide Thank you for choosing talech and Elavon This guide shows you how to setup and connect your iCT 250 device to the talech Register. If you have any questions, contact talech support at support@talech.com 888.995.1998. Your iCT device supports the following payment methods Chip &...
Installation Remove Box Contents Your iCT box should have the following contents: iCT 250 Terminal Magic Box Power Supply Phone Cable Paper Roll Insert Paper Roll & Connect Ethernet Cable Lift flap ontop of the terminal and Connect an ethernet cable from insert the paper roll the magic box to your router.
Configuration To Begin, press the “Up” button Select “Setup Menu” (#3) from the home screen to enter the To select an option press the green button Admin Menu (highlighted below) or corresponding # on the keypad ADMIN MENU 1 - Clerk Menu 2 - Batch Menu 3 - Setup Menu 4 - Maintenance...
Configuration Select “Ethernet Setup” (#2) Select “Dynamic IP” (#1): NOTE: Write down IP address displayed ETHERNET MENU ETHERNET SETUP 1 - Current Setup 1 - Dynamic IP 2 - Ethernet Setup 2 - Static IP 3 - Timers Setup Press yellow button to go back Press the “Up”...
Configuration Enter 6556 as the Press yellow button to go back Communications Port to the Semi-Integrated menu ETHERNET MENU 192.1668.2.2 Enter Terminal Port 6556 Select “Receipts Options” (#3) Select the “ECR” option (#1) SEMI-INTEGRATED RECEIPT OPTIONS 1 - Enable SemiInteg 1 - ECR 2 - Communication Type 2 - Terminal...
Page 7
Configuration Open the talech app on your iPad Go to the setting menu Select Card Reader Select iCT 220 and iCT 250 (highlighted in light blue) - 07 -...
Page 8
Thank you again for choosing talech and Elavon to be part of your business experience. If you have further questions on how to set up your iCT 250 device, or questions relating to anything else, please dont hesitate to contact us. We are here 24/7 to help you run your business better today.