Table of Contents
Advertisement
2.4 Printer and Paper Load Function
The i5100 EFTPOS terminal has an in-built thermal printer. To load paper:
a) Ensure the terminal is powered on.
b) Open the paper compartment cover by pressing the button located towards
the top of the terminal, above the metal blade, as shown below.
Paper
compartment
button
c) Position the paper roll with the end of the roll protruding from underneath the roll.
Metal blade to
tear off paper
d) Pull the paper out slightly and close the cover.
e) Test the operation of the printer by pressing the paper FEED button.
Press button in
this direction
Correct paper
position
Dial-up EFTPOS Merchant Operating Guide – May 2011
Paper
compartment
cover
9
Advertisement
Table of Contents
