Table of Contents
Advertisement
4.0 Procedures
4.1 Inserting a Chip Card
When your terminal is enabled for chip card acceptance, chip cards are inserted
into the terminal and left there for the duration of the transaction.
The chip card reader is located at the bottom of the terminal below the keypad.
1.
Check the terminal is displaying the message INSERT/SWIPE CARD.
2.
Hold the card face-up with the chip towards the terminal.
3.
Insert the card as far as it will go into the reader and continue processing
the transaction.
4. Leave the card in the terminal until prompted to remove.
12
Dial-up EFTPOS Merchant Operating Guide – May 2011
Advertisement
Table of Contents
Need help?
Do you have a question about the i5100 Eftpos and is the answer not in the manual?